Acnet basics

• Acnet terminal is located just to the right of e907mon. It is an NCD unix terminal.
• Important for Mipp screens are found under the "S" group. To get there, using one of the larger square windows, click on the letter in the upper left corner. Change it to 'S' and hit return. S16, S17, and S45 what I've looked at so far. For example:
  • To find the JGG and Rosie currents, click S17, then "MIPP2" (fifth row down), the go to the first of the four screens. Do that by clicking '-' or '+' on the left-most field of the fourth line. Then you should see a line for "Jolly Green Giant" and for "Rosie". Each line has a set point current (in yellow), an actual current (in green), and a status (in green or red). I'm not yet knowledgable about all the possible status settings. Though "T" is trip, for example.
  • To find the status of some of the beam line magents follow the above directions, except go to the fourth screen under MIPP2.
  • Under S45, you can make plots of various swics and multiwire beam chambers.
• In principle we can use Acnet to control settings, eg, the currents in the analysis magnets, but also beamline stuff. User beware. Nominally the ability to do this is disabled. To enable, go to the 'Utilities' window and click on 'Settings". Choosing something other than 'Disable' will allow you to control Acnet devices